库号：M362384 品牌/制造商： 美国metone 型号：085A
产品名称: 相对湿度温度传感器
型号系列:085A
品牌:metone
产地:美国
价格:**终成交价格需联系客服
083F 相对湿度传感器是一种高度灵敏且稳定的温度测量工具，具有出色的精度。它在 0-100% 的整个相对湿度条件下都可靠，在气象、工业、实验室和其他要求苛刻的环境中表现同样出色。085A 型是一种组合的相对湿度/温度传感器。两种传感器都可以与各种辐射屏蔽一起使用。
083F/085A 相对湿度传感器测量一微米厚的介电聚合物层的电容变化。该薄膜通过金属电极吸收水分子并引起与相对湿度成比例的电容变化。薄聚合物层反应非常迅速，在不到 5 秒的时间内提供高达 90% 的**终相对湿度值。传感器的响应基本上是线性的，具有很小的滞后性，并且对温度的依赖性可以忽略不计。
全固态结构，数字电子
不到 5 秒的快速响应到**终值的 90%
12 VDC 时 4 mA 的低功耗
使用蒸馏水轻松清洁
0-100% 相对湿度的 0-1V 输出
将使用 12 VDC 电池供电
环境监测
工业卫生
采矿和矿石加工
气候研究
中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。
英文原文：
Relative Humidity Sensor 083F & Relative Humidity / Temperature Sensor 085A
The 083F Relative Humidity Sensor is a highly sensitive and stable temperature measurement tool that provides outstanding accuracy. It is reliable in the full range of relative humidity conditions, from 0-100%, performing equally well in meteorological, industrial, laboratory and other demanding settings. Model 085A is a combined relative humidity/temperature sensor. Both sensors can be used with a variety of radiation shields.
The 083F/085A Relative Humidity Sensor measures variance in the capacitance change of a one- micron thick dielectric polymer layer. This film absorbs water molecules through a metal electrode and causes capacitance change proportional to relative humidity. The thin polymer layer reacts very quickly, providing up to 90% of the final value of relative humidity in fewer than five seconds. The sensor’s response is essentially linear, with small hysteresis, and negligible temperature dependence.
FEATURES
All solid state construction, digital electronics
Fast response of less than 5 seconds to 90% of final value
Low power consumption of 4 mA at 12 VDC
Easily cleaned using distilled water
0-1V output for 0-100% RH
Will operate from a 12 VDC battery
APPLICATIONS:
Ambient Monitoring
Industrial Hygiene
Mining & Ore Processing
Climate Research
上一个产品：美国metone空气温度传感器061
下一个产品：美国metone相对湿度传感器083F
