库号：M945964 品牌/制造商： 美国metone 型号：E-BAM PLUS
产品名称: 便携式环境 β 衰减质量监测器
型号系列:E-BAM PLUS
品牌:metone
产地:美国
价格:**终成交价格需联系客服
Met One Instruments, Inc. E-BAM Plus 是一款便携式实时 beta 测量仪，已获得 EPA 批准，可用于 PM 10颗粒物测量。E-BAM Plus 将通过自动提供真正准确、精确、实时的细颗粒物测量来满足用户、监管机构和卫生界人士的需求。它是一种坚固、便携、电池供电的包装，可在 15 分钟内轻松部署和运行。
美国 EPA 指定室外 PM 10 FEM 配置。
实时、准确的结果，无需校正因素——无论季节或地理位置如何。
环境采样可准确测量半挥发性硝酸盐和有机化合物。
轻巧、坚固的结构可在几分钟内轻松安装在三脚架上。
全天候结构允许真正的环境采样。
CCS COMET 云兼容
使用交流电源运行。
持续监控
E-BAM Plus 通过连续采样和报告浓度数据来自动化颗粒测量。数据记录每分钟更新一次。E-BAM Plus 消除了过滤器收集和过滤器称重，以及高维护仪器的费用。随着环境颗粒物监测采用 β 衰减，它变得简单、精简和便宜。
多年来，对环境细颗粒物进行实时准确、可靠和可重复的测量一直是环境监管机构和卫生专业人员难以实现的目标。E-BAM Plus 可靠且易于操作。结果几乎实时自动报告，无需人工干预。因为采样是在真实的环境条件下进行的，所以很容易检测到半挥发性有机化合物和硝酸盐，从而避免了颗粒物的测量不足。E-BAM Plus 将产生与手动参考方法相当的结果。
连续采样
E-BAM Plus 是一款坚固、轻便、便携的仪器，无需外壳即可直接在恶劣环境中运行；不到 15 分钟即可轻松安装。没有其他采样器能与 E-BAM Plus 的指定性能、便携性和灵活性相媲美。
设置
E-BAM 的快速启动是通过一系列提示来确保安装人员按照初始化顺序进行的。接下来，E-BAM 执行一系列自检诊断并提醒安装人员任何纠正措施。自检完成后，E-BAM 会自动将自身置于正常操作模式。
*请注意，即使安装程序只是打开 E-BAM，它也会使用默认设置值将自己置于正常运行状态。
使用提供的 PM 10 入口进行尺寸选择性浓度测量。使用一体式流量计、压力传感器和环境温度传感器来保持尺寸选择入口中与流量相关的切割点。PM 10 入口可去除大于 10 微米的颗粒，不受风速和风向的影响。
E-BAM Plus 的标准配置是一个独立的环境密封铝制外壳，放置在坚固的三脚架上。该系统可以永久放置在屋顶、道路附近、工业场所，或快速部署以监控紧急情况。“E”代表环保仪器。E-BAM Plus 专为在没有额外保护的恶劣环境中工作而设计。
远程收集选项包括固定电话或蜂窝数据调制解调器、CCS 云报告、视距扩频无线电以及非常偏远的站点的卫星通信。通过与网络、数据记录器、PC 或笔记本电脑的直接通信，可以轻松访问 E-BAM Plus 数据。
存储的 E-BAM Plus 数据可以使用其中一种通信选项 USB 闪存驱动器进行检索；或者数据可能被转发到第三方数据采集系统。AIR Plus 软件支持 E-BAM Plus，并提供完整的通信、数据库和带有图表的报告模块。每个 E-BAM Plus 都包含彗星数据检索软件。
E-BAM Plus 提供连续的数字和模拟输出。模拟输出可选择多个满量程电压或 4 – 20 mA 电流回路。数字输出可用作 RS-485、RS-232 或 USB。提供单通道触点闭合报警继电器输出。这用于警告未指定的错误，例如；胶带破损、传感器故障、流量故障等。
数据存储
内部 E-BAM Plus 数据记录器可以存储超过 484 天的每小时浓度数据以及来自多达八次其他测量的每小时平均数据。数字和模拟输出都可以轻松连接到其他数据记录系统。
易于操作
初始化后，E-BAM Plus 将持续运行，校准验证期间除外。当前数据、历史数据和状态信息随时可用，不会中断正常运行。
数据验证
E-BAM Plus 具有可选择的数据验证标准，包括但不限于：偏离滚动平均值、高值偏移和电源故障。如果发生错误，则将其与日期、时间和错误类型一起输入错误日志。
环境监测
粉尘监测
环境监测
工业设施和过程监控
隧道监控
军事与国土安全
应急响应
中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。
英文原文：
E-BAM PLUS Portable Environmental Beta-Attenuation Mass Monitor
The Met One Instruments, Inc. E-BAM Plus is a portable, real-time beta gauge which has EPA Approval for PM10 particulate measurements. The E-BAM Plus will satisfy users, regulators and those from the health community by providing truly accurate, precise, real time measurement of fine particulate matter automatically. It is a rugged, portable, battery operated package easily deployed and operational in 15 minutes.
ADVANCED FEATURES
U.S. EPA Designation for Outdoor PM10 FEM Configuration.
Real-time, accurate results without correction factors — regardless of season or geographic location.
Ambient sampling provides accurate measurement of semi-volatile nitrates and organic compounds.
Lightweight, rugged construction is easily mounted on a tripod in minutes.
All-weather construction allows for true ambient sampling.
CCS COMET Cloud Compatible
Operates on AC power.
CONTINUOUS MONITORING
The E-BAM Plus automates particulate measurement by continuously sampling and reporting concentration data. Data records are updated every minute. The E-BAM Plus eliminates filter collection and filter weighing, and the expense of high maintenance instruments. With the adoption of beta attenuation for ambient particulate monitoring it has become simple, streamlined, and inexpensive.
ABOUT ACCURACY
Real-time accurate, reliable, and repeatable measurement of ambient fine particulate matter has been the elusive goal of environmental regulators and health professionals for many years. The E-BAM Plus is reliable and is easy to operate. Results are automatically reported in near real time with no human intervention. Because sampling occurs under true ambient conditions, semi-volatile organic compounds and nitrates are easily detected thereby avoiding under measurement of particulates. The E-BAM Plus will produce comparable results to the manual reference method.
CONTINUOUS SAMPLING
The E-BAM Plus is a robust, lightweight, portable instrument that operates directly in hostile environments without an exterior enclosure; easily installed in less than 15 minutes. No other sampler matches the Designated performance, portability and flexibility of the E-BAM Plus.
SET UP
Quick startup of the E-BAM is assured by a series of prompts guiding the installer on the initialization sequence to follow. Next the E-BAM performs a series of self-test diagnostics and alerts the installer of any corrective action. Upon completion of the self-tests, the E-BAM automatically places itself in normal operating mode.
*Note, even if the installer does nothing other than turn the E-BAM on, it will put itself in normal operation using default setup values.
PARTICULATE SIZE SELECTION
Size selective concentration measurements are made using the supplied PM10 inlet. Flow dependent cut points in the size selective inlets are maintained using integral flow meter, pressure sensor and ambient temperature sensor. The PM10 inlet removes particles larger than 10 microns and is not affected by wind speed and wind direction.
CONSTRUCTION
The standard configuration of the E-BAM Plus is a self-contained environmentally sealed aluminum enclosure placed on a rugged tripod. This system can be permanently placed on rooftops, near roads, at industrial sites, or rapidly deployed to monitor emergency situations. ‘E’ represents Environment Proof instrument. The E-BAM Plus has been specifically designed to work in hostile environments with no additional protection.
DATA REPORTING & COMMUNICATION
Remote collection options include landline or cellular data modem, CCS Cloud reporting, line of sight spread spectrum radio, and for very remote sites, satellite communications. E-BAM Plus data is easily accessed by direct communication with a network, data logger, PC or laptop computer.
Stored E-BAM Plus data may be retrieved using one of the communication options, USB Flash Drive; or the data may be forwarded to third party data acquisition system. AIR Plus Software supports the E-BAM Plus and provides a complete communication, data base and reporting modules with charting. Comet data retrieval software is included with every E-BAM Plus.
DIGITAL, ANALOG AND ALARM OUTPUTS
The E-BAM Plus provides continuous digital and analog outputs. The analog output is selectable to several full-scale voltages or 4 – 20 mA current loop. Digital outputs are available as RS-485, RS-232 or USB. A single channel contact closure alarm relay output is available. This is used for alert of an unspecified error such as; broken tape, sensor failure, flow failure, etc.
DATA STORAGE
The internal E-BAM Plus data logger can store over 484 days of hourly concentration data as well as hourly averaged data from up to eight other measurements. Both digital and analog outputs are easily connected to other data recording systems.
EASY TO OPERATE
Once initialized, the E-BAM Plus will operate continuously, except during calibration verification. Current data, historical data, and status information are available at any time without interrupting normal operation.
DATA VALIDATION
The E-BAM Plus has selectable criteria for data validation, including but not limited to; deviation from a rolling average, high value excursions, and power failure. Should an error occur, it is entered into the error log with date, time and type of error.
APPLICATIONS:
Ambient Monitoring
Dust Monitoring
Environmental Monitoring
Industrial Facility & Process Monitoring
Tunnel Monitoring
Military & Homeland Security
Emergency Response
上一个产品：美国metone便携式环境Beta衰减质量监测器E-BAM
下一个产品：美国metone形态采样器SUPER SASS
